FIT CAR 2X(TWO) JDM 4-POINT RACING SAFETY HARNESS 2" INCH STRAP SEAT BELT BLUE

Description

Store category
Sign Up Now !
You may also like
FIT CAR 2X(TWO) JDM 4-POINT RACING SAFETY HARNESS 2" INCH STRAP SEAT BELT BLUE
Product Description
Application:
For Racing Car/ UTV/ ATV/ Go-kart Fitment.
Specification:
100% quality assurance tested, more responsive, less expensive, easier to install.
Refitting racing seats with 4 point racing harness, effectively fixes the body of passengers and protect the safety of drivers.
Made of wider and thicker high-strength polyester, provides more safety and comfort than OEM harness.
The mounting points and buckle are made of high quality iron metal, adopt large diameter bolts to bolt-in fix, making them safer.
The buckle design is firm, 1 second release quickly without any struggle.
2 inch width ribbon minimize the accumulation of strength and avoid greater damage.
2 vertical straps and 2 horizontal belts better fasten the driver's body.
Fully adjustable length shoulder and lap straps fit different figure of riders.
Material & Color:
Material: made of high quality Polyester and Iron.
Color: as picture.
Package Included:
2x Safety Belts;
Installation Steps:
Remove existing seat belt and hardware.
Wrap the lap belt portion around the front of the seat and bring the (A)(B) ends to the back of the seat. Run the (C)(D) ends over the top of the seat to the back of the seat. If there is a headrest, run it between the 2 headrest posts.
Connect the (A)(B)(C)(D) ends to the existing anchor points using hex bolt.The bolt should be firmly tightened. If the vehicle does not have pre-existing anchor points (threaded holes), then you should create them and make (A)(B) ends between 15-21 inches apart.
Use the length adjusters to snug up new 4 point seat belt.
Installation Note:
Mounting hardware to the floor should always have metal-to-metal contact. Avoid carpet, plastic or any other material between the fastener components and the floor which could tend to loosen over time.
All bolts used through Non-threaded holes must have either a lock-nut, lock washer or apply a thread locking compound for security.
When replacing belts, always use firstly the anchorages provided by the vehicle, or seat manufacturer when available.
Do not connect both ends of this belt to the same, single mounting point.
Legal Disclaimer:
PQY Racing Safety Harness can minimize injury when properly installed or used according to professional instructions. The ability of any restraint system to minimize or prevent injury is directly related to the type or severity of the accident. No restraint system can prevent injury or death in accident. PQY Racing Safety harness is NOT designed for street legal vehicles UTV or ATV, so professional installer is highly recommended!
Note:
Provide Tracking Number With Every Order, Please Buy With Confidence!
No installation guides are included, we highly recommend to seek professional installation. Any damage during installation will not be refunded.
Will come with everything you see in the picture. Please allow difference due to manual measurement.
Please check that the picture matches before purchase. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.
For any inquiries or special requests such as larger amount ordering please write to us.
Payment
Delivery details
Feedback
About us
Contact us
Payment
Delivery details
Feedback
About us
Contact us