Climax KM4000 KEY MILL

Description

Climax KM4000 KEY MILL - Climax KM4000 KEY MILL Specification Overall length 18.5 inches 469.9 mm Overall width 14.0 inches 355.6 mm Overall height 13.25 inches 336.6 mm Base size 9.0 x 18.5 inches 228.6 x 469.9 mm Slide travel, longitudinal 7.88 inches 200.2 mm Slide travel, transversal 2.0 inches 50.8 mm Vertical travel max 3.0 inches 76.2 mm Power, electric: 120V or 230V, 50-60Hz 1.0 Hp 0.75 kW Power, pneumatic 1.2 Hp 0.9 kW Power, hydraulic 4.0 Hp 2.98 kW No load variable spindle speed minimum 350 rpm maximum 675 rpm Spindle hole diameter INCH 0.75 inches 19.1 mm Maximum end mill diameter 1.25 inches 31.75 mm Maximum shaft diameter: standard bar clamp 18.0 inches 457.2 mm with optional chain clamp 24.0 inches 609.6 mm Minimum shaft diameter: standard bar clamp 8.0 inches 203.2 mm with optional shim kit 4.0 inches 101.6 mm Minimum clamping space required on stub shaft 8.0 inches 203.2 mm obstructed shaft 10.5 inches 266.7 mm (NOTE: The KM4000 can cut keyways within 2.2 inches (55.88 mm) of the obstruction) One end mill included Ø 0.75 inches Ø 19.1 mm Operating weight 195 lbs. 89 kg Shipping weight (with speed control) 250 lbs. 114 kg Shipping dimensions 24 x 24 x 19 inches 610 x 610 x 483 mm Machining Ability Example Material C1018 steel Metal removal rate 1 inch 3/minute 16.4 cm3/min Keyway dimensions 1.0 x 0.5 x 8.0 inches 25.4 mm x 12.7 mm x 203.2 mm Cutting Time 3 minutes and 10 seconds 3 minutes and 10 seconds Keyway Length: 8 inches (203.2 mm) Keyway Width: 3.25 inches with 2 inch sideshift (82.6 mm with 50.8 mm sideshift) Shaft Diameter: 4 – 24 inches (101.6 – 609.6 mm) Power Option: Electric, Pneumatic, or Hydraulic High quality, heavy-duty machine Cuts new keyways up to 3.25 inches (82.6 mm) wide and 7.88 inches (200.2 mm) long in one setup. Two-inch (50.8 mm) lateral travel allows cutting wide pockets or slots with a single end mill. Universal type motor and triple gear reduction provide plenty of torque. Permanently sealed lubrication, so machine can be operated at any angle. The leadscrew is a precision Acme thread and is fitted with roller thrust bearings. Anti-friction bearings used throughout. Dovetail ways machined for smooth movement in both longitudinal and transversal directions. Features zeroing-type adjusting dial for controlling cutter depth. Contoured base is self-centering and self-aligning on the shaft. Electronic speed control offers precision control of spindle speeds while retaining full torque over available rpm range. Compact, easy to set up, versatile Needs only 8.5 inches (215.9 mm) of shaft for clamping, or only 10.5 inches (266.7 mm) of shaft for clamping from an obstruction. Mounts on shafts from 4 – 24 inches (101.6 – 609.6 mm) in diameter. Mounts anywhere along the shaft. Rapid longitudinal travel can be made with a drill motor for quick setups. Technical Data 0.75 inches (19.05 mm) is the standard spindle size for inch-machines. 20 mm (0.79 inches) is the standard spindle size for metric machines. Many different machine variations are possible Excellent Condition
***Please Read Everything Below Before Buying***
No International or APO / FPO Shipping. Additional charges may apply to AK & HI or residential freight shipments.
If it is not pictured or described, please do not assume it is included.
All specifications are believed to be accurate but are subject to verification by the buyer.
The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. Please contact us with any specific requests or questions. We do not have everything listed as we are always receiving new inventory. If you need anything, please contact us.
WE ARE A PROUD MEMBER OF THE MDNA.